NL
EN
MCU Coatings
The unique technology of the moisture-curing MCU-Coatings makes applications possible in almost all circumstances. Never again dependent on weather conditions and full protection against moisture and corrosion.
Primers
MCU-Zinc
- Surface tolerant, one component, zinc- primer
- Approved for Class B Slip coefficient
- Versatile and easy to use, anticorrosive primer
- Replaces epoxy zinc. Performs better than inorganic zinc
- Unlimited paint time
-
Paintable with itself
-
Tolerates fly rust
-
High DFT tolerance
-
1 primer for each type of pre-treated substrate, including UHP WJ, dry blasting, wet grit blasting, Cleaning with electric or hand tools, etc.
Products
MCU-Miozinc
- Surface tolerant MIO / zinc filled primer
- Better surface tolerance than epoxy mastic
- Performs better than inorganic zinc primers
- High DFT tolerance and unlimited paintability
- Adheres to most old coatings and to different metals
-
Primer for full or local priming over any type of pre-treated substrate from St2 to wet / dry blasted surfaces
-
Sa 2.5 is not required for maximum performance
-
Tolerates fly rust
-
Recommended for immersion, splash zone and atmospheric exposure
Products
MCU-Aluprime
- Most surface tolerant primer
-
Penetrating sealer with low viscosity, which can replace penetrating epoxy sealers
-
Excellent wear and impact resistance
-
Can be used on any kind of pre-treated surface
-
Intermediate / Topcoat in extremely tough environments
Products
Intermediate and functional final layer
MCU-Mastic
- Universal intermediate / barrier coating
- Suitable as a colored topcoat for indoor use with limited UV exposure
- Aromatic topcoat to replace epoxy
- High resistance to atmospheric chemicals
- Best choice for use in immersion in salt or fresh water
- Ideal for use over MCU-Coatings' primers for long-term performance in ballast tanks and cargo spaces
- Tar free
Products
MCU-Miomastic
- Used as an intermediate / barrier coating for new construction and complete removal projects
- High solids content aromatic intermediate layer for atmospheric conditions
-
MCU-Miomastic contains a blend of moisture-curing polyurea resin and MIO and has many advantages over epoxy mastics
-
Applicable to any marine, offshore, hydropower, wastewater or other installation, such as sewage treatment, exposed to salt or fresh water
-
Easy to paint over and repair
-
Ideal for use on MCU-Coatings' primers for long-term performance in atmospheric and indoor applications
Products
Topcoat
MCU-Topcoat
- Semi-gloss aliphatic topcoat
- Available in RAL and specific customer color
- UV-resistant topcoat for atmospheric use
- Can be applied directly to galvanized and other non-ferrous surfaces
Products
MCU-Miotopcoat
- MIO modified, matte aliphatic topcoat
- Suitable for repainting old coatings
- Very durable topcoat for atmospheric conditions
- MIO modification greatly extends the lifespan and makes it possible to paint easily after years
Products
MCU-Alutopcoat
- Aluminum filled topcoat
-
Very durable, wear-resistant and weather-resistant topcoat
-
Excellent topcoat to repair galvanized steel
Products
MCU-Clearcoat
- Very durable, wear-resistant and weather-resistant topcoat
- High gloss
Products
MCU-Shieldcoat
- High gloss aliphatic finish
- Available in RAL and specific customer color
- UV-resistant topcoat for atmospheric use
Products
MCU-NiteGlo
-
Luminous coating for more than 8 hours
-
High durability
-
Applicable on land and offshore, for industrial safety
Products
High heat
MCU-Aluminium HH
- Heat-resistant coating up to 650 ºC
- Rust-resistant primer / end of a two-layer system
- Final layer on MCU-Zink HH
Products
MCU-Zink HH
- Heat resistant coating up to 420ºC
- Anti-rust primer under MCU-Auminium HH
Products
Accelerators
MCU-Quickcure
- Accelerates the drying time by 80%
- Can be painted over after 45 minutes, depending on temperature
- Increase the DFT tolerance of the MCU-Coatings products
Products
"The result is impressive, and we are very happy with the service and quality of Hodij Coatings!”
terug naar boven